Unfortunately we do not stock the DPX-CC2-TR - Raritan Sensor - Dual contact closure sensor, 2 ports, default NC, RJ-12 currently.


Please contact us to find out if this is merely a temporary situation. If the product has gone out of production we should be able to suggest a suitable alternative product.

DPX-CC2-TR - Raritan Sensor - Dual contact closure sensor, 2 ports, default NC, RJ-12

DPX-CC2-TR ( Contact Closure Sensor )

Description:

The DPX-CC2-TR dual contact closure is used with third-party sensors such as smoke detectors, magnetic door locks, or to trigger webcams whenever a cabinet door is opened. DX-PD2C5 has active dry contacts with 12V power to support door locks and contact closures for third-party sensors. The Dual Contact Closure Sensor - requires customer-provided Normally Closed (NC) or Normally Open (NO) switch like door open/close, door locked/unlocked, smoke (present or absent). Factory default is NC. Each of the two ports (channels) can be independently set to NC or NO. RJ-12 connection to the PX/PX2 PDU. Note: Older models do not support water sensor(s).

Features:

• Four termination points for connecting two discrete detectors/switches.
• Dual contact closure sensor connection, with two LEDs for indicating two channels' status.
• The new sensor's terminals can be separated from the sensor while the old model is fixed.
• The new sensor supports Raritan water sensors DPX-WSC & DPX-WSF.

Raritan environment sensors enable data center managers to:

• Ensure uptime by monitoring racks for potential hot spots.
• Save on cooling by confidently raising data center temperatures.
• Maintain cabinet security with contact closure sensors.
• Improve data center availability by receiving environment alerts.
• Make strategic decisions on cooling design and containment.
• Set thresholds and alerts to monitor onsite or remote facilities.

Environmental Monitoring System: Contact Closure

Specification:

Dual contact closure, requires customer-provided Normally Closed (NC) or Normally Open (NO) switch, e.g. door open/close, door locked/unlocked, smoke present/absent, etc. Each of the two ports (channels) can be independently set to NC or NO, factory default is NC, RJ-12 connector.
(PX and PX2 models require firmware PX1.4.1 / PX2.1.5 or higher).

Please note : This sensor requires extra contacts. (Alarm style door contacts compatible)

Click here for further information

compatible products

POA - please ...order by telephone/email/fax

Qty: