APC APSURT8000RMXLI APS SMARTUPS RT8000VA Rack Mount 230V 6U (UPSB3-10)



Description:

APC Smart-UPS RT 8000VA RM 230V APC Smart-UPS On-Line,6400 Watts /8000 VA,Input 230V /Output 230V, Interface Port DB-9 RS-232, RJ-45 10/100 Base-T, Smart-Slot, Extended runtime model, Rack Height 6 U Includes: CD with software, Rack Mounting support rails, Service Manual, Smart UPS signalling RS-232 cable, User Manual, Web/SNMP Management Card. Availability Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Scalable runtime Allows additional run time to be quickly added as needed. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Manageability Network manageable Provides remote power management of the UPS over the network. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. SmartSlot Customize UPS capabilities with management cards. LED status indicators Quickly understand unit and power status with visual indicators. Serial connectivity Provides management of the UPS via a serial port. Adaptability Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP Serviceability User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Disconnected battery notification Warns when a battery is not available to provide backup power. Audible alarms Provides notification of changing utility power and UPS power conditions Protection Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Cold-start capable Provides temporary battery power when the utility power is out. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment

Features:



Specification:

Output
Output Power Capacity
6400 Watts / 8000 VA
Max Configurable Power
6400 Watts / 8000 VA
Nominal Output Voltage
230V
Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load
93.0%
Output Voltage Distortion
Less than 3%
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages
220, 240
Crest Factor
3 : 1
Topology
Double Conversion Online
Waveform Type
Sine wave
Output Connections
(1) Hard Wire 3-wire (H N + G)
(4) IEC 320 C13 IEC 320 C13
(4) IEC 320 C19 IEC 320 C19
(4) IEC Jumpers
Bypass
Internal Bypass (Automatic and Manual)
Input
Nominal Input Voltage
230V
Input Frequency
50/60 Hz +/- 5 Hz (auto sensing)
Input Connections
Hard Wire 3 wire (1PH+N+G)
Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations
160 - 280V
Other Input Voltages
220, 240
Input Total Harmonic Distortion
Less than 7% for full load
Batteries & Runtime
Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules
4
Typical recharge time
2.20 hour(s)
Replacement Battery
RBC44
RBC™ Quantity
2
Extended Run Options
APC Smart-UPS RT 8000VA RM 230V

compatible products

POA - please ...order by telephone/email/fax

Qty: