USB-8x8 - Smart-e USB Matrix Switch, USB 2.0, CAT 6/6A STP, RS422 (50m)
SMART-E - USB-8X8 (Front & Rear) 1U unit
Description:
The Smart-e USB-8x8 is a USB switch with Cat 5-8 outputs. The unit allows the selection and transmission of up to 8 different computers to up to 8 peripherals e.g. Touch screen, Mouse, Keyboard. The peripherals can be located at distances of up to 100m CAT 5-8 cable. ** CAN BE USED WITH SMART-E AV MATRIX SWITCH TO CREATE A KVM CONTROL MATRIX SOLUTION. The USB-8x8 offers a cost effective solution of connecting multiple computers to multiple USB peripherals. Up to 8 independent PCs can be selected to up to 8 different peripherals. The peripherals can be located up to 100m from the PCs, connecting via Cat 5-8 cable. High speed 36 Mbps connectivity is achievable for both USB V1.1 and V2 devices. Selection of PCs is via a RS422 control port on the front of the unit using standard Smart-e protocol. There is also a control panel option allowing individual user selection. The unit can be populated with 8 way modules allowing flexible configurations to match system requiremen. The USB-8x8 is designed to fit easily into standard 19” racks and is quick and easy to install with minimal configuration.
Features:
• Uses easy to install, inexpensive CAT 6/6A STP cable
• Outputs reach up to 50m
• Supports USB V2.0 up to 12Mbps
• Single CAT 6/6A STP for USB and power
• Break before make switching
• Supplies remote power to receivers
• Simple RS422 control
• 4 port USB receiver hub
• High ground loop immunity
• Chassis fits standard 19″ racks
• Uses Smart-e standard control protocol
• Independent control panel
• Use with a Smart-e video matrix for integrated KVM solution
• 3 Year warranty
** CAN BE USED WITH SMART-E AV MATRIX SWITCH TO CREATE A KVM CONTROL MATRIX SOLUTION.
USB-8X8 setup showing how this unit can be used in conjunction with an AV matrix switch to produce a Matrix KVM solution.
Specification:
USB
Versions: V1.1 @ V2.0
Maximum Speed: Higher speed 36 Mbps
Connector transmitter : USB Type B
Connector receiver : USB Type A
POWER
Voltage 90-230V AC
Connector : IEC C14
Max Current: 1A A/S
Frequency 50/60 Hz
DIMENSIONS
Height: 1U
Width: 19”
Depth: 300mm
Weight: 5Kg
CONTROL
Control Signals: RS232
Control Connector: RJ45
Control Speed : 9600 baud
Control Type: Multi-drop