ALIF4000 - ADDER - Transmitter & Receiver / ADDERLink INFINITY 4000 Series, 4K KVM, Dual-head, IP KVM extender over a single fibre (Pair)

Transmitter & Receiver shown

Description:

The ADDERLink™ INFINITY™ 4000 Series (ALIF4000) is the world's first dual-head, high performance 4K IP KVM extender over a single fiber. The ALIF4000 delivers pixel-perfect, color accurate picture quality at 4K60 with USB2.0 with fast switching. Fully compatible with the existing INFINITY range, and supported by the trusted ADDERLink INFINITY Manager (AIM), the ALIF4000 can be used as a point-to-point extender or easily integrated into a wider matrix system; enabling KVM users to migrate to 4K without the need to rip and replace.

Features:

• Dual-head 4K screens over a single link: the ALIF4000 can deliver two 4K60 screens over a single link

• IP-based: use your existing standard 10GbE networking infrastructure to extend or matrix your computing resources to your users. Supports teaming for network resilience and redundancy

• Perfect digital video: using the same encoding system as the other products in the ADDERLink INFINITY range, the digital video is spatially lossless, with 1:1 pixel mapping, ensuring that the digital video you receive is the same as the one leaving your remote computer

• Backwards compatibility: the ALIF4000 can integrate seamlessly into your existing ADDERLink INFINITY setup, replacing or working in conjunction with your existing ALIF endpoints

• Digital KVM matrix: by the addition of ADDERLink INFINITY Management system (A.I.M.) you can turn multiple point to point extenders into a matrix system that allows any workstation to connect to any computer connected to the network. See the A.I.M. datasheet for details

• USB2.0: enables you to connect any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers

• Audio capability: analog audio (Line In, Line Out) to support headsets and microphones

• EDID management: the system has intelligent EDID management to either allow the true characteristics of the monitor to be passed back to the computer, or controlled resolutions to be imposed

• Plug and Play: the ADDERLink INFINITY range is delivered in a zero config state so they work as soon as they are connected, without the need for drivers or software

• USB True Emulation: USB2.0 enables connection to any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers

DIAGRAM

Specification:

Standards

USB: 4 ports of USB2.0 of USB True Emulation to support keyboard, mouse and touch
USB device seen as: 7 or 13 port hub
Ethernet: 10GbE (No 10 / 100 / 1000 support)

Operating/storage conditions

Operating temperature: 0 to 40ºC / 0 to 104ºF
Storage temperature: -10 to 60ºC / 10 to 140ºF
Storage and operating relative humidity: 10-90% non-condensing
Altitude: < 3000m

Power

External power: 12VDC, 5A
Typical power consumption: 20W
BTU: 68.24BTU/hr

Physical

Dimensions: (L) 210mm /8.3” x (W) 215mm/8.5” x (D) 40mm/1.6”
Weight: 1.8kg /4 lb

Materials

Aluminium and steel construction

Connectors - Local Unit (TX)

Computer: 2 x display port, 2 x USB type B 2 x 3.5mm audio jack sockets, 1 x DB9 socket
Ethernet: 2 x 8p8c (RJ45), 2 x SFP+ cages
Power: 3 pin Kycon socket

Connectors - Remote Unit (RX)

Desk: 2 x display port, 5 x USB type A, 2 x 3.5mm audio jack sockets, 1 x 3.5mm SPDIF socket
Ethernet: 1 x 8p8c (RJ45), 2 x SFP+ cages
Power: 3 pin Kycon socket

Video Resolutions

Supports up to 4K UHD or DCI and refresh rates to 60Hz

Audio

Analog Line in/out 2 channel 16bit 48KHz 1V RMS in / 1V RMS out

Packing Box

Dimensions: (L) 285mm / 11.2-inch (W) 245mm / 9.6inch (D) 145mm/5.7inch Weight: 2.5kg / 5.5lb

Approvals / Compliance

CE & FCC

(See the compliance section for full list)

Click here for further information

compatible products

request a demo

Price:£ 3,350.00 + vat

Qty: