QFX5100-48T Juniper Networks QFX5100 48 x 10G Ports Ethernet switch Layer 3

Juniper QFX5100-48T Front & Rear

Description:

QFX5100-48T: Compact 1 U 10GbE data center access switch with 48 tri-speed (10GbE/1GbE/100 Mbps) RJ-45 ports and six QSFP+ ports with an aggregate throughput of 1.44 Tbps or 1.08 Bpps per switch. General Range information: The highly flexible, high-performance Juniper Networksฎ QFX5100 line of Ethernet switches provides the foundation for today’s and tomorrow’s dynamic data center. As a critical enabler for IT transformation, the data center network supports cloud and softwaredefined networking (SDN) adoption, as well as rapid deployment and delivery of applications. Mission-critical applications, network virtualization, and integrated or scale-out storage are driving the need for more adaptable networks. With its diverse set of deployment options, including fabric, Layer 3, and spine and leaf, the QFX5100 is the universal building block for data center switching architectures, enabling users to easily adapt as requirements change over time. The QFX5100 line includes 10GbE (fiber and copper) and 40GbE fixed-configuration options with rich Layer 2, Layer 3, and MPLS features. The QFX5100 runs the same reliable, high-performance Juniper Networks Junosฎ operating system that is used by Juniper Networks EX Series Ethernet Switches, Juniper Networks routers, and Juniper Networks SRX Series Services Gateways, ensuring a consistent implementation and operation of control plane features across the entire Juniper infrastructure. Featuring a built-in Insight Technology capability, the QFX5100 provides valuable performance and troubleshooting data via microburst monitoring and hotspot statistics. The QFX5100 can also be used as a Satellite device in a Junos Fusion fabric architecture, deployed in Juniper’s new Virtual Chassis Fabric switching architecture, and installed in Juniper’s existing Virtual Chassis switching architecture QFX5100 Switch Models The QFX5100 line includes four compact 1 U models and one 2 Umodel, each providing wire-speed packet performance, very low latency, and a rich set of Junos OS features. In addition to a high throughput Packet Forwarding Engine (PFE), the performance ofthe control plane running on all QFX5100 models is further enhanced with a powerful 1.5 GHz dual-core Intel CPU with 8 GB of memory and 32 GB SSD storage.

Features:

-48T Switch
-Layer 3 managed
- 48 x 100/1000/10000 + 6 x 40 - Gigabit QSFP+ (breakout compatible)
- front to back airflow
- rack-mountable

Layer 2 Features
• STP—IEEE 802.1D (802.1D-2004)
• Rapid Spanning Tree Protocol (RSTP) (IEEE 802.1w); MSTP
(IEEE 802.1s)
• Bridge protocol data unit (BPDU) protect
• Loop protect
• Root protect
• RSTP and VSTP running concurrently
• VLAN—IEEE 802.1Q VLAN trunking
• Routed VLAN Interface (RVI)
• Port-based VLAN
• MAC address filtering
• Private VLAN (PVLAN)
• QinQ
QFX5100 Ethernet Switch
8
• VLAN Translation
• Static MAC address assignment for interface
• Per VLAN MAC learning (limit)
• MAC learning disable
• Link Aggregation and Link Aggregation Control Protocol
(LACP) (IEEE 802.3ad)
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

Link Aggregation
• Multi-chassis link aggregation (MC-LAG)
• Redundant Trunk Group (RTG)
• LAG load sharing algorithm—bridged or routed (unicast or
multicast) traffic:
- IP: SIP, Dynamic Internet Protocol (DIP), TCP/UDP source
port, TCP/UDP destination port
- Layer 2 and non-IP: MAC SA, MAC DA, Ethertype, VLAN ID,
source port
- FCoE packet: Source ID (SID), Destination ID (DID),
Originator exchange ID (OXID), source port

Layer 3 Features (IPv4)
• Static routing
• Routing policy
• Routing protocols (RIP, OSPF, IS-IS, BGP)
• Virtual Router Redundancy Protocol (VRRP)
• Bidirectional Forwarding Detection (BFD) protocol
• Virtual router
• Dynamic Host Configuration Protocol (DHCP) relay
• Proxy Address Resolution Protocol (ARP)
Multicast Features
• Internet Group Management Protocol (IGMP): v1, v2 , V3
• IGMP snooping: v1, v2, v3
• IGMP Filter
• PIM-SM
• Multicast Source Discovery Protocol (MSDP)
• Security and Filters
• Secure interface login and password
• RADIUS
• TACACS+
• Ingress and egress filters: Allow and deny, port filters, VLAN
filters, and routed filters, including management port filters
• Filter actions: Logging, system logging, reject, mirror to an
interface, counters, assign forwarding class, permit, drop,
police, mark
• SSH v1, v2
• Static ARP support
• Storm control, port error disable, and autorecovery
• Control plane denial-of-service (DoS) protection
• Dynamic ARP Inspection (DAI)

• Sticky MAC address
• DHCP snooping
Quality of Service (QoS)
• L2 and L3 QoS: Classification, rewrite, queuing
• Rate limiting:
- Ingress policing: 1 rate 2 color, 2 rate 3 color
- Egress policing: Policer, policer mark down action
- Egress shaping: Per queue on each port
• 12 hardware queues per port (8 unicast and 4 multicast)
• Strict priority queuing (LLQ), smoothed deficit weighted roundrobin
(SDWRR), weighted random early detection (WRED),
weighted tail drop
• 802.1p remarking
• Layer 2 classification criteria: Interface, MAC address,
Ethertype, 802.1p, VLAN
• Congestion avoidance capabilities: WRED
• Trust IEEE 802.1p (ingress)
• Remarking of bridged packets
Data Center Bridging (DCB)
• Priority-based flow control (PFC)—IEEE 802.1Qbb
• Enhanced Transmission Selection (ETS)—IEEE 802.1Qaz
• Data Center Bridging Exchange Protocol (DCBX), DCBx FCoE,
and iSCSI type, length, and value (TLVs)
Fibre Channel over Ethernet (FCoE)
• FCoE transit switch (FIP snooping ACL installation)
• FCoE session path learning
• FCoE session health monitoring
• Graceful restart for FIP snooping
• FC-BB-6 VN2VN snooping
Virtual Chassis
• 40GbE and 10GbE as Virtual Chassis port
• Virtual Chassis Routing Engine (RE) election
• Virtual Chassis pre-provisioning (plug and play)
• Auto-LAG formation of Virtual Chassis ports
• Mixed Virtual Chassis support
• FCoE transit across Virtual Chassis members
• QoS on Virtual Chassis ports
• Local Designated Forwarding
• Graceful RE switchover (GRES)
• Nonstop routing (NSR)
• Nonstop bridging (NSB)
• Monitor distributed aggregate interface
• Control plane protection for virtual RE








Specification:

QFX5100-48T: Compact 1 U 10GbE data center access switch
with 48 tri-speed (10GbE/1GbE/100 Mbps) RJ-45 ports and six
QSFP+ ports with an aggregate throughput of 1.44 Tbps or 1.08
Bpps per switch

QFX5100 Switch Specifications
Hardware
Switching Capacity
• QFX5100-48T: 1.44 Tbps/1.08 Bpps
.

• QFX5100-48T-AFO/AFI:
- 100 Mbps RJ-45: 48
- 1GbE RJ-45: 48
- 10GbE RJ-45: 48
- 10GbE SFP+: 24 (with breakout cable)
- 40GbE QSFP+: 6


General Information:
• Each QSFP+ port can be configured as a 4 x 10GbE interface
• Each QSFP+ port can be configured as a 40 Gbps port
• USB port
• Console port
• 2 management ports: 1 RJ-45 and 1 SFP
• Supported transceiver and direct attach cable
• SFP+ 10GbE optical modules
• SFP+ DAC cables: 1/3/5 m twinax copper and 1/3/5/7/10 m
active twinax copper
• SFP GbE optical and copper module
• QSFP+ to SFP+ 10GbE direct attach break-out copper (1/3 m
twinax copper cable)
Rack Installation Kit
• Versatile four post mounting options for 19-in server rack or
datacom rack
Airflow
• Front-to-back and back-to-front cooling
• Redundant variable-speed fans to reduce power draw
Power Supply and Fan Modules
• Dual redundant (1+1) and hot-pluggable power supplies
• 110-240 V single phase AC power
• -36 to -72 V DC power
• Redundant (N+1) and hot-pluggable fan modules for front-toback
and back-to-front airflow
Performance Scale (Unidimensional)
• MAC addresses per system: 288,0003
• VLAN IDs: 4,096
• Number of link aggregation groups (LAGs): 128
• Number of ports per LAG: 32
• Number of FCoE VLANs/FC Virtual Fabrics: 4,095
• Firewall filters: 4000
• IPv4 unicast routes: 128,000 prefixes; 208,000 host routes;
644 ECMP paths
• IPv4 multicast routes: 104,000
• IPv6 multicast routes: 52,000
• IPv6 unicast routes: 64,000 prefixes
• ARP entries: 48,000
• Jumbo frame: 9,216 bytes
• Spanning Tree Protocol (STP)
- Multiple Spanning Tree Protocol (MSTP) instances: 64
- VLAN Spanning Tree Protocol (VSTP) instances: 253
• Traffic mirroring
- Mirroring destination ports per switch: 4
- Maximum number of mirroring sessions: 4
- Mirroring destination VLANs per switch: 4
2Measured with 10GbE passive DAC and QSFP passive DAC.
3MAC address table uses a hash-based scheme to program entries; therefore, some entries may not be programmed due
to hash index collision.
4USR optics and QFSP+ SR4 optics.


compatible products

POA - please ...order by telephone/email/fax

Qty: