ZPE Nodegrid Serial Console

DVI-2715-AOC 15 Mtr DP-AOC Cable DisplayPort / mDP 1.4 DVIGear HyperLight DVI-27xxx-AOC Series ( Detachable )

DisplayPort HyperLight AOC Detachable

Description:

DVI-27xxx-AOC Series HyperLight® Active Optical Cables (AOC) support DisplayPort 1.4 signals with data rates up to 32.4 Gbps. Compact and rugged, these cables offer both full-size and mini DP connectors, support resolutions up 8K /30P and are available in lengths up to 100m (328.1 ft.). Shattering Limitations — DVIGear’s HyperLight® Series is a new generation of advanced Active Optical Cables (AOC) that employ cutting edge technology to deliver unprecedented resolution, performance and value. HyperLight cables support DisplayPort 1.4 and provide a wide range of features in a compact, lightweight form‑factor. They are fully HDCP 1.4 / 2.2 compliant and support signals with data rates up to 32.4 Gbps. (HBR3). These features enable HyperLight cables to support very high-resolution applications at 4K / 60Hz (4:4:4) with cable lengths up to 100 meters and 8K / 30Hz (4:4:4) up to 50 meters. Easily Adaptable — HyperLight cables support both DisplayPort and Mini DisplayPort connections. The cables are terminated with low profile Mini DisplayPort (mDP) connectors that measure only 8x12 mm. This narrow cross‑section makes it very easy to pull these cables through conduit or other tight spaces. An optional Pull Sleeve Kit further simplifies cable pulls. The cables also include two detachable docking connectors that allow them to plug into full-size DisplayPort receptacles. The docking connectors include a locking pin for added security. This functionality enables seamless connections to content servers and use in other high-density applications without any intermediary dongles or adapters. Easy to Install, Even in Plenum Spaces — HyperLight cables are plenum rated (UL CMP-OF), compact, lightweight, and highly flexible. Constructed using a hybrid design of 4x POF (Polyfluorinated Optical Fiber) and 6x copper wires, they are rugged, yet flexible, with a minimum bend radius of just two millimeters. Their exceptional flexibility makes them an ideal solution for cable routing in tight spaces. Professional Environments — These cables are designed for use in mission-critical applications where image quality and dependability are paramount. HyperLight cables are engineered from the ground up for superior performance and unfailing reliability with MTBF >150,000 hours. Video signals are transmitted over four optical fibers, which make them immune to interference from environmental noise. The optical transmission path provides a very low RFI / EMI profile, which allows the cables to be installed in sensitive applications with strict security requirements. The cables draw power from the connected DisplayPort source, eliminating the need for an external power supply. HyperLight AOC cables are ideally suited for applications that require ultra-high resolution DisplayPort signals to be extended over long cable runs with flawless image quality.

Features:

Lightweight, compact, flexible, Plenum-rated Active Optical Cables (AOC)
Low RFI / EMI profile for sensitive applications
Supports DisplayPort 1.4 HBR3, HDCP 1.4 / 2.2
Supports data rates up to 8.1 Gbps / lane or 32.4 Gbps total
Extends resolutions up to 8K / 30 Hz up to 164 ft. (50 meters)
Extends resolutions up to 4K / 60Hz up to 328 ft. (100 meters)
Supports direct connection of Mini DisplayPort products
Detachable Full-Size DisplayPort docking connectors can be secured with locking pin
Ultra-low Power Design uses power from the DisplayPort source; no power adapter needed
Supports bidirectional communications over AUX channel for EDID, HDCP, Link Training, etc.

DisplayPort HyperLight AOC Detachable connectors

Specification:

DVI-2715-AOC
15 Mtr DP-AOC Cable DisplayPort / mDP 1.4 DVIGear HyperLight DVI-27xxx-AOC Series ( Detachable )


Performance
Standards Compliance DisplayPort 1.4 / HBR3, HDCP 1.4 / 2.2, UL CMP-OF (File E471410)
Maximum Pixel Clock Frequency 810 MHz
Maximum Video Bit Rate Supports up to 8.1 Gbps per lane, 32.4 Gbps Total (HBR3)
Maximum Color Depth Up to 30 bits/pixel
Maximum Supported Resolutions 4K: 3840×2160 @ at 120 Hz with 24 bits/pixel RGB color
5K: 5120×2880 @ at 60 Hz with 30 bits/pixel RGB color
8K: 7680×4320 @ at 30 Hz with 24 bits/pixel RGB color
Digital Audio Support 1-8 channels, 16 or 24-bit Linear PCM, 32-192 kHz sampling rate; maximum bitrate 36 Mbps
Connections
DisplayPort Input / DisplayPort Output 20-pin DisplayPort Male Connectors with locking latch
Power No external power supply is required.
AUX Channel Support
AUX Channel Communications Supports bidirectional communications for EDID, HDCP, Link Training, etc.
AUX Channel Data Rate 1 Mbps
HDCP Support HDCP 1.4 and HDCP 2.2
Optical
Optical Technology 4x Discrete Optical Channels, 10 GHz, 850 nm
Optical Transmitter Tx Module: 4x 850 nm Multi-mode VCSELs
Optical Receiver Rx Module: 4x GaAs PIN Photo Diodes
Cable
Fiber Cable Type Hybrid cable with 4x POF (Polyfluorinated Optical Fiber) and 6x copper members
Cable Jacket Plenum Rated, Black
Standard Lengths (meters)(1) 3, 5, 7.5, 10, 12.5, 15, 20, 25, 30, 40, 50, 60, 75, 80, 90, 100
Standard Lengths (feet)(1) 9.8, 16.4, 24.6, 32.8, 41.0, 49.2, 65.6, 82.0, 98.4, 131.2, 164.0, 196.9, 246.1, 262.5, 295.3, 328.1
Maximum Cable Length 328 ft. / 100 meters(1)
Mechanical - Cable
Product Weight Varies with length
Maximum Tensile Load > 200N
Minimum Bend Radius 2 mm (fiber and jacket)
Crush Resistance > 500N
Cable Connector (L x W x H) Male Mini-DisplayPort: 1.77" x 0.53" x 0.31" (45.0 mm x 13.4 mm x 8.0 mm)
Cable Outside Diameter (W x H) 0.20" x 0.11" (5.1 mm x 2.9 mm)
Mechanical - Tx and Rx Docking Plugs
Docking Connectors Female Mini-DisplayPort to full-size Male DisplayPort
Construction High-impact plastic enclosures with DisplayPort latch and locking pin
Dimensions (L x W x H) 2.1" x 0.82" x 0.62" (53.7 mm x 20.8 mm x 15.8 mm)
Environmental
Operating Temperature -4° to +158° F (-20° to +70° C)
Storage Temperature -4° to +185° F (-20° to +85° C)
Operating / Storage Humidity 5% to 85% (non-condensing)
Power Requirements
Power Source Powered from DisplayPort source device
Power Consumption < 0.43 watt typical (130 mA @ 3.3 VDC)
Regulatory Approvals
Fiber Optic Cable FCC, UL CMP-OF (File E471410), CE, RoHS
Warranty
Limited Warranty 3 Years
Model Number
DVI-27xxx-AOC DisplayPort v1.4 HyperLight Active Optical Cable ( xxx = length in meters )
Accessories Included
DVI-27000-RX HyperLight Mini-DP-AOC, Passive Docking Connector, Rx
DVI-27000-TX HyperLight Mini-DP-AOC, Passive Docking Connector, Tx
DVI-2500-AOC-PIN HyperLight HDMI Cable Locking Pin (2x)
DVI-27xxx-AOC-QSG-01 1x Quick Start Guide
Optional Accessories
DVI-2600-AOC-CVR HyperLight Cable Pull Cover
DVI-2600-AOC-PSK HyperLight Pull Sleeve Kit
Note 1: Cable lengths greater than 50 meters (164.0 feet) can only support DisplayPort 1.2 specifications.



Note 1: All specifications are subject to change without notice.

compatible products

£335.00 £402.00 (Inc vat)

Qty: