IPL-101-IP5-0.5C IPower Inline IP Monitor unit. Single Phase 1mtr 32AMP IND309 in IND309 out ( IPL Range )
Description:
32 Amp intelligent inline monitor Reporting Power, temperature and humidity This unit has a built in web server and full remote monitoring over SNMP. With a wide range of input and outlet options, up to a maximum of 32 Devices can be monitored and will work on circuits up to 32A. Power monitoring is carried out using a calibrated resistor for the most accurate reading up to 1% or better. iPower Lite has an easy-to-use HTML interface with the ability to set SMS and Email alarms for all critical parameters. iPower Lite can be configured as a Primary device, with the ability to control an additional 31 Secondary units, from a single IP address. iPower Lite will work in conjunction with other iPower units to create a fully flexible monitoring system allowing for individual racks to have measurement only, or measurement and switching capabilities PDU Agent ™ Management Software Collate and produce reports on all your readings. PDU Agent is an entry level management platform with easy to use dashboard layout that lets you log measurements and events from multiple devices including historical evaluations and to collate and produce accurate billing information
Features:
Connected into each single phase PDU.
Up to 32 units can be daisy chained over a single IP address
PDU Agent can support up to 50 x IP addresses
Lead lengths can be changed as required
1 per PDU or 32A Input
Benefits:
- Can buy as little as one unit at a time as required so less upfront costs.
- UK manufactured and supported.
- Free software to produce billing reports.
- 5 Year Warranty
- Easy plug in installation
Metering:
Energy metrics including:
• Volts
• Watts
• Amps
• Power factor
• kWh
• Frequency
• VA
• kVA
• Peak Volts
• Peak Amps
• Internal Temp
• Kg/Co2
• KJ/H
• BTU/H
Environmental metrics including:
• Up to 8 Temperature sensors
• Single humidity sensor
• Remote display
Daisy Chaining:
• MOD BUS port
Communications & Protocols:
• HTTP
• HTML
• CGI
• SMTP
• SNMP v2
• IP v4
IPL Inline meter IPL-101-IP5-xx
Specification:
Body Dimensions: 67mm wide 55mm deep 350mm Long
Fixing Centres: 378mm
Material: Sheet MS
Finish: Black powder coat
Fixing Method: End Brackets
Input: 0.5m 3x4mm H07RN-F to 32A Commando
Output: 0.5m 3x4mm H07RN-F to 32A Commando socket
Protection:
Indicator: Front display & trip status neon.
Earthing: M6 Earth stud to rear
Rating: 32A @ 230V AC 50/60 Hz
Standards: Conforms to BS EN60950-1:2005 2nd edition +AM1 & AM2
Conforms to BS EN62368-1:2014+All:2017
UK CA: Compliant
WEEE: Compliant
RoHS: Compliant
CE: Compliant
Operating Temp: -10° to +55°C
Warranty: 5 years return to base
INPUT
Type / 1 Phase
RMS Volts / 230V
RMS Amps / 32A
OUTPUT
Type / 1 Phase
RMS Volts / 230V
RMS Amps / 32A
PF / 0.9
PDU TOTAL:
kVA / 7.36
kW / 6.624
Electrical Rating:
Please note, these calculations are based on an assumed steady voltage of 230V AC and a Power Factor of 0.9. Voltage fluctuations will affect the kVA & kW values. The only rating that is constant is Current (Amps) This PDU will handle a constant current draw up to 32A. The kVA & kW ratings and are for indication purposes only.